WinPack is the most comprehensive and modular monitoring system currently on the market. WinPack is lightweight and comfortable to wear for patients hosted in low-acuity settings or being remotely monitored at home.
Patients can benefit from the same technology usually found in ICUs by just “wearing” it on a WinPack that merely weighs 130g. It consists of a central module called “WinCard” and different sensor modules that could be easily plugged & played on the central module. The available sensor modules are: Continuous Non Invasive Blood Pressure – cNIBP, NIBP, 5-Lead ECG (including Respiration Rate monitoring, Heart Rate monitoring and Arrhythmia Detection), 2-Lead ECG (monitoring Heart Rate), SpO2 (including Pulse Rate monitoring), Body Temperature and Body Position.
Its modularity allows for ease of use and flexibility – nurses can even add or remove sensor modules when the WinPack is in use on patients without any monitoring disruption. Patients’ privacy is guaranteed as their data/vital signs are only available to clinicians and nurses. The WinPack is completed by two communication modules offering Bluetooth or Wi-Fi transmission and batteries allowing continuous monitoring for up to 30 hours.
FIND OUT MORE ABOUT OUR PRODUCTS
LEARN MORE ABOUT OUR SENSOR MODULES
WINCARD MODULE
The WinCard is the main module of the WinPack where sensor modules are inserted to monitor vital signs depending on the needs of the Patient. The WinCard was designed to be modular, scalable and easy to use. Its modularity and self-configurability allow to easily “plug & play” sensor modules depending on the needs of Patients.
| DIMENSIONS 2.5cm H x 5.6cm W x 8.5cm L | WEIGHT 54 g (with Standard Battery) 67 g (with XL Battery) |
| COMMUNICATION MODULE Bluetooth: Network Standard: 802.15.1 WiFi: Network Standard: 802.11 b/g/n Frequency: 2.4GHz | WIRELESS NETWORK SECURITY SUPPORT Bluetooth: hardware encryption WiFi: WPA2 – PSK, SSL (Optional) |
| STANDARD BATTERY Li-Ion Battery, 3.7 V, 700 mAh (2.6Wh) Operating Time: 12 hours Charge Time: 2 hours | XL Battery Li-Poly Battery, 3.7 V, 2260 mAh (8.4Wh) Operating Time: 30 hours Charge Time: 4 hours |
CONTINUOUS NON INVASIVE BLOOD PRESSURE SENSOR MODULE
The Continuous Non-Invasive Blood Pressure Sensor Module (cNIBP) continuously measures the blood pressure in real-time. This new sensor module represents an effective technological evolution of non-invasive and cuffless blood pressure monitoring, creating a more comfortable experience for patients, as well as a better system stability, wearability and data accuracy. The cNIBP Module was successfully validated through clinical trials conducted in line with the European Society of Hypertension International Protocol (ESH-IP).
| MODULE DIMENSIONS 2.5cm H x 5.5cm W x 3.4cm L |
WEIGHT 76 g |
| WRIST SUPPORT DIMENSIONS 14.5cm – 20cm |
RANGE Systolic: 60 – 230 mm Hg Diastolic: 40 – 130 mm Hg |
| PRECISION Mean error of less than ± 2 mm Hg and a standard deviation of ≤ 5 mm Hg (excluding the calibration system mean error) |
RESOLUTION 1 mm Hg |
| REFRESH RATE 1 Hz |
DEFIBRILLATOR PROOF |
CONTINUOUS NON INVASIVE BLOOD PRESSURE SENSOR MODULE
The non-invasive blood pressure sensor module (NIBP) measures the arterial pressure by using a cuff. This sensor module uses the oscillometric technique combined with advanced motion artifacts rejection technology, making the measurement more accurate than traditional technology. Blood pressure can be automatically measured at regular intervals or when it is required, at any time, by the medical staff. The systolic, diastolic and mean arterial pressure are calculated and measured. Both disposable and reusable cuffs in different sizes are available for all types of patient including adults and children older than 36 moths.
| MODULE DIMENSIONS 2.5 cm H x 2.7 cm W x 3.4 cm L |
WEIGHT 240 g (Without Battery) |
| CUFF MODULE DIMENSIONS 14cm H X 7.7cm W X 3.2cm L |
MEASURING METHOD Oscillometric |
| START MEASURING Automated and On-Demand |
RANGE Systolic: 35 – 260 mmHg Dyastolic: 15 – 215 mmHg |
| MEASUREMENT TIME 25 seconds (excluding cuff pressurization time) |
RESOLUTION 1 mmHg |
| PRECISION Mean Error Of <± 5 mmHg Standard Deviation Of ± 8 mmHg |
BATTERY RANGE 90 Measures (Standard Battery) 350 Measures (XL Battery) |
5-LEAD ECG AND RESPIRATION RATE SENSOR MODULE
The 5-Lead ECG Sensor Module (5-Lead wires) continuously measures the heart rate and the respiration rate in real-time, while detecting the following types of arrhythmia: Atrial Fibrillation (AT), Idioventricular Rhythm (IVR), Accelerated Idioventricular Rhythm (AIVR), Ventricular Tachycardia (VT), Asystole (PAU), Bradycardia (BRA), Supraventricular Ectopic Beat (SVEB), Supraventricular Salvo (SVS), Supraventricular Tachycardia (SVT), Couplet (CPT) and Ventricular Ectopic Beat (VEB). The sensor module allows displaying in real-time up to four of the following seven leads: 1) Lead I; 2) Lead II; 3) Lead III; 4) aVr; 5) aVl; 6) aVf; 7) Vc (precordial lead). For adults and children over 36 months of age only.
| DIMENSIONS 2.5 cm H x 2.7 cm W x 3.4 cm L |
WEIGHT 41 g |
| BANDWIDTH 0.05 – 150 Hz |
SAMPLING 500 Hz per channel |
| SAMPLING RESOLUTION 4.5 µV |
DISPLAY RANGE 0 to 254 bpm |
| PRECISION RANGE 24 to 240 bpm |
PRECISION ± 9.7% |
| RESOLUTION HR 1 bpm |
DISPLAY RANGE RR 0 to 50 rpm |
| PRECISION RANGE RR from 5 to 50 rpm |
RESOLUTION RR 1 rpm |
| PRECISION RR ± 2 rpm |
DEFIBRILLATOR PROOF |
| LEAD OFF DETECTION |
SPO2 SENSOR MODULE
The SpO2 sensor module continuously measures the blood oxygen saturation and pulse rate in real-time. The module allows displaying the plethysmographic curve. Both disposable and reusable probes can be used on the Patient and on different body positions (e.g. finger, ear).
| DIMENSIONS 2.5 cm H x 5.5 cm W x 3.4 cm L |
WEIGHT 27 g |
| DISPLAY RANGE 0 to 99 % |
RESOLUTION 1 % |
| PRECISION RANGE Adults ±2 [SpO2 between 70-99%] Newborn ±3 [SpO2 between 70-99%] |
SPO2 AVERAGING 8 beats |
| PR RANGE from 30 to 254 bpm |
PR RESOLUTION 1 bpm |
| PR PRECISION ±2 bpm or ±2%, the greater of the two |
REFRESH TIME 1Hz |
| TECHNICAL ALERTS empty probe, disconnected probe |
2-LEAD ECG SENSOR MODULE
The 2-Lead ECG Sensor Module continuously measures the heart rate in real-time. It is used by connecting its two wires to a chest belt or electrodes.
| DIMENSIONS 2.5 cm H x 2.7 cm W x 3.4 cm L |
WEIGHT 29 g |
| SAMPLING 500 Hz |
BANDWIDTH 0.4 – 160 Hz |
| SAMPLING RESOLUTION 12 bit |
DISPLAY RANGE 0 to 254 bpm |
| PRECISION RANGE 24 to 240 bpm |
RESOLUTION 1 bpm |
| PRECISION ± 5 bpm |
DEFIBRILLATOR PROOF |
BODY TEMPERATURE SENSOR MODULE
The Body Temperature sensor module continuously measures the body temperature in real-time. Both disposable and reusable probes can be worn by the Patient.
| DIMENSIONS 2.5 cm H x 2.7 cm W x 3.4 cm L |
WEIGHT 12 g |
| RANGE 25° to 45° C |
RESOLUTION 0.1° C |
| MAX ERROR < ± 0.2° C |
MAX SETTLING TIME 5 minutes |
| SAMPLIMNG 0.2 Hz |
REFRESH RATE 0.2 Hz |
BODY POSITION SENSOR MODULE
The Body Position sensor module continuously measures the following body positions of the patient: standing, lying on the left side, lying on the right side, prone, supine, motion and running.
| DIMENSIONS 2.5 cm H x 2.7 cm W x 3.4 cm L |
WEIGHT 12 g |
| AVAILABLE POSITIONS Standing, Lying on the left side, Lying on the right side, Prone, Supine, Motion, Running |
REFRESH RATE 1 Hz |
LEARN MORE ABOUT OUR SENSOR MODULES
WINCARD MODULE
CONTINUOUS NON INVASIVE BLOOD PRESSURE SENSOR MODULE
NON-INVASIVE BLOOD PRESSURE SENSOR MODULE (NIBP)
5-LEAD ECG AND RESPIRATION RATE SENSOR MODULE
SPO2 SENSOR MODULE
2-LEAD ECG SENSOR MODULE
NON-INVASIE BLOOD PRESSURE SENSOR MODULE (NIBP)
BODY POSITION SENSOR MODULE